Scania Technical Support

Welcome to Our Specialized Technical Support!

If you are entering the world of automotive diagnostics or already have a workshop specializing in vehicles from brands such as Scania, Volvo and Cummins, but need cutting-edge technical support, you are in the right place!

Transform Your Workshop Efficiency with Our Remote Services

Imagine solving complex diagnostic problems without leaving the comfort of your workshop. This is exactly what we offer at Obd 2 Truck.

Many workshops already have diagnostic and programming interfaces, but they deal directly with the mechanical and heavy part of the truck, which we know is a service that requires a lot of effort and attention. This work is costly, but necessary, often making it impossible to carry out diagnostic and programming services that modern vehicles require.

With that in mind, Obd 2 Truck can help you. Using remote control software, our team accesses your computer (notebook) and, with the appropriate software installed, configured and connected to the vehicle, we carry out the requested services quickly and accurately.

Pricing and Services Structure

If you have a workshop and are in need of support, in the Services I, II, IV category we charge 45% of the amount charged to the end customer. The suggested values ​​are below, but you can adjust and charge the amount you consider appropriate in your workshop and region.

In the Services III category, there are advanced programs that depend heavily on specific knowledge, and we need to charge the total amount shown in the table. We recommend that the workshop is able to charge additional amounts to maintain a good win-win relationship, fostering a beneficial partnership for both sides.

See Our Support Services Menu Below

Explore our menu of services and see how we can help optimize the performance of the vehicles you service. Add efficiency and quality to your work with our specialized technical support!

I. Checking, Repair and Maintenance Services for Scania Vehicles

I. CHECK, REPAIR AND MAINTENANCE

SERVICE DESCRIPTION

R$ BRL

$USD

Fault Checking and Elimination ( DTC's ) Inactive

Connection to OBD2 Socket, Diagnosis with tool, printing of inactive fault codes and elimination of system fault codes.

R$ 200.00

$40.00

Diagnosis and Elimination of Active Faults ( DTC’s ) + Repair or Maintenance Service

Diagnosis of active and inactive faults, printing of faults to the customer, – Discover and repair the cause of the fault and analyze the codes again. This field consists of the majority of Services and includes all service labor.

R$ 200.00

+ Service

$40.00

APS System Status and Operation Check

System Status, Air Pressure, Voltage Supply, Solenoid Valve, Temperature, Speed ​​Signals, etc.

R$ 200.00

$40.00

ECU System Status and Operation Check

Checking the engine control unit, Injection Deviation, Cylinder balancing, Operating Data.

R$ 200.00

$40.00

Checking the Status and Operation of the Exhaust Gas Post-Treatment System (SCR)

System Check, System Test 1,2,3, Dosage, Fault Correction.

R$ 200.00

$40.00

Combined Instrument System (ICL) Status and Operation Check

Audio System, Checking the backlight, Checking the indicators, Checking the sound and speakers, Language,

R$ 200.00

$40.00

Visibility System Status and Operation Check (VIS)

Checking the operation and status of turn signals, headlights, reverse, front and rear lights.

R$ 200.00

$40.00

Active Fault Light Removal for Trailer without ABS

Active fault light on the dashboard can be confusing and worrying, indicating problems that do not actually exist. Our intervention consists of deactivating this fault light, using specialized programming techniques, compatible with the configuration of your vehicle.

R$ 200.00

$40.00

II. Calibration and Adjustments for Scania Vehicles

II. CALIBRATION AND ADJUSTMENT SERVICES

SERVICE DESCRIPTION

R$ BRL

$USD

Speed ​​Limit Adjustment

Setting the maximum vehicle speed limit to meet local safety standards and regulations, ensuring compliance and operational safety.

R$ 250.00

$45.00

Idle Speed ​​Adjustment

Optimization of engine idle speed to improve vehicle efficiency and stability.

R$ 180.00

$35.00

Adjustment and Reprogramming of Spare Parts when replacing or repairing modules

Adjustments necessary after exchanging parts involving modules, or putting a new module in place or after some types of reprogramming that require this activity to ensure compatibility and functioning.

R$ 200.00

$40.00

Force Increase Adjustment for Body Braking

Reinforcement of the body's braking response, increasing safety and control in heavy load situations.

R$ 185.00

$35.00

Calibration of New Suspension Level Sensor

Exact configuration of the new suspension sensor to ensure accurate readings and improve driving dynamics.

R$ 185.00

$35.00

Adjust Driving Suspension Level (Height)

Customization of suspension height to adapt to driving and load conditions, aiming for comfort and safety.

R$ 185.00

$35.00

Adding/Removing Activate Daylight

Enabling or disabling daytime running lights as needed or preferred.

R$ 185.00

$35.00

Align Fuel Consumption Indicator

Calibration of the consumption indicator to provide accurate and compatible information between the actual consumption average (tank) and that displayed on the panel, helping with cost management.

R$ 300.00

$60.00

Pedal Calibration and Increasing Pedal Sensitivity

Pedal response adjustment for more responsive acceleration and improved control.

R$ 350.00

$60.00

Automatic Box Calibration

Fine-tuning the automatic transmission to improve gear shifting smoothness and optimize performance.

R $650.00

$130.00

Increased Torque and Power (EOL)

Improvement in engine torque and power at the end of the production line, aiming for maximum performance and efficiency.

R$ 950.00

$180.00

III. Advanced Programming

III. ADVANCED PROGRAMMING SERVICES

SERVICE DESCRIPTION

R$ BRL

$USD

Reactivation/Deactivation of the Defective Viscous Fan Propeller

Propeller-Fan activation/deactivation adjustment, ensuring its activation or deactivation as necessary to maintain the ideal engine temperature.

R$ 380.00

$75.00

Restoration of original ARLA SCR System Operation Settings

Reconfiguration of the Selective Catalytic Reduction (ARLA) system to factory settings, ensuring effectiveness in reducing emissions.

R$ 800.00

$150.00

Headlight Bulb Change for H4, H7, LED, halogen and xenon.

Replacement of the headlight bulb configuration with options including H4, H7, LED, and Halogen/Xenon, improving visibility and adapting to the vehicle's preferences or requirements without having to change the harness.

R$ 380.00

$75.00

Correction of Injector Faults in New Scania NTG

Diagnosis and repair of injector anomalies on Scania New Truck Generation (NTG) models, aiming to restore engine efficiency and performance.

R$ 1,100.00

$200.00

Programming the EG1 Power Take-Off Function on New Scania NTG

Installation of an EG1 power take-off on Scania NTG models, allowing the operation of auxiliary equipment and increasing the vehicle's versatility.

R$ 1,100.00

$200.00

IV. Editing Power Files in Scania

IV. POWER FILE REPROGRAMMING

FOCUS AND BENEFITS OF THE EDITING SERVICE

R$ BRL

$USD

STAGE I + Pedal Sensitivity Adjustment and Snare Calibration

Increment values ​​between 6% and 10% on archive maps, Efficiency for fast transport, with loads between 10 and 20 tons, Improved fuel efficiency, Improved performance for daily operations.

R$ 1,800.00

$345.00

STAGE II + Pedal Sensitivity Adjustment and Snare Calibration

Increase values ​​between 10% and 14% on archive maps, Maximum power for heavy loads and long distances between 20 and 30 tons, Suitable for maximum load conditions, Significant improvement in torque and power to improve performance and fuel efficiency over long distances.

R$ 1,800.00

$345.00

FILE EDITING CHECKS

SERVICE DESCRIPTION

R$ BRL

$USD

Just Detailed Examination of Percentage Added in Power File

Extraction and analysis of the detailed technique to find out the percentage increment in the changed ECU file.

R$ 300.00

$60.00

Return Power file to Original Setting Values

After extraction and detailed analysis to discover the percentage increase in the changed ECU file, restoration to original factory values ​​is carried out. Ideal for owners who want to return their vehicle to its original specifications.

R$ 400.00

$75.00