Original Scanmatik 2 PRO & PCM Flash Set | OBD 2 TRUCK

Scanmatik 2 PRO & PCM Flash

Scanmatik 2 PRO is a professional multi-brand scanner designed for diagnostics of electronic control systems of American, European, Japanese and Russian vehicles. It can be used as a J2534 device with a large number of diagnostic programs, made for standard SAE J2534 and RP1210 interfaces.

Scanmatik Pro 2 is a powerful J2534/PassThru tool for use with a wide range of automaker scanners and vehicle electronic module programming software.

You don't need to buy dozens of interfaces, with the SM-PRO2 you can combine them all into one and guarantee high performance. The SM-PRO2 is a genuine, original interface. Manufactured with the most rigorous quality controls.

This technology is important because it ensures that information is transferred according to the standards established by the automotive industry, reducing the possibility of errors and ensuring user safety. The Scanmatik Pro 2 interface is compatible with PassThru technology, which allows it to be used with a wide variety of vehicles and programming software.

New features found in Scanmatik 2 PRO

• Galvanic isolation of the USB port (with power supply);
• Redesigned protection of K-lines and CAN buses on a new element base;
• Increased working speed via Bluetooth by about 20%;
• Pulsed power supplies of our own design (no heating, wide input voltage range from 5 to 55V);
• Load-Dump overvoltage protection (when the generator is switched off with the engine running).

Broadest support of J2534-1/2 standards

• Supplying programming voltage (5-24V) to OBD connector pins: 6, 8, 11, 12, 13, 14;
• AUX programming voltage output (via additional cable).
• For full support of peripheral units on GM (GDS2) and VAZ/Renault cars:
• An additional CAN bus on pins 12-13 running in 12H-13L or 12L-13H configuration.

With Scanmatik you are able to communicate with various diagnostic and programming software from various brands and manufacturers:

• BMW ISTA / Rheingold: is an advanced diagnostic software for BMW and Mini vehicles, allowing access to various functions and modules, including programming and coding.
• Caterpillar Electronic Technician (CAT ET): is a diagnostic software for Caterpillar equipment, allowing the reading and analysis of data from various modules, as well as programming and adjustments.
• Chrysler Flash Application: is a programming and updating software for electronic modules in Chrysler vehicles, allowing fault correction and software updates.
• Cummins Calterm III: is an advanced programming software for Cummins equipment, allowing customization of parameters and adjustments for better performance and efficiency.
• Cummins Insite: is a diagnostic and programming software for Cummins equipment, allowing data reading and analysis, as well as module programming.
• Detroit DDDL: is a diagnostic and programming software for Detroit vehicles, allowing data reading and analysis, as well as programming of electronic modules.
• Eaton Service Ranger: is a diagnostic and programming software for Eaton equipment, allowing data reading and analysis, as well as programming of electronic modules.
• Ford Module Programming Tool (IDS): is a diagnostic and programming software for Ford vehicles, allowing data reading and analysis, as well as programming of electronic modules.
• Forscan: is a diagnostic software for Ford, Mazda, Lincoln and Mercury vehicles, allowing the reading and analysis of data from various modules.
• GM GDS-2/SPS: is a diagnostic and programming software for GM vehicles, allowing data reading and analysis, as well as programming of electronic modules.
• Honda HDS: is a diagnostic and programming software for Honda and Acura vehicles, allowing data reading and analysis, as well as programming of electronic modules.
• Hino Diagnostic Explorer DX2: is a diagnostic and programming software for Hino equipment, allowing data reading and analysis, as well as programming of electronic modules.
• Jaguar/Land Rover SDD: is a diagnostic and programming software for Jaguar and Land Rover vehicles, allowing data reading and analysis, as well as programming of electronic modules.
• JCB Service Master 4: is a diagnostic and programming software for JCB equipment, allowing data reading and analysis, as well as programming of electronic modules.
• Mercedes Xentry/DAS PassThru: is a diagnostic and programming software for Mercedes-Benz vehicles, allowing data reading and analysis, as well as programming of electronic modules.
• Nissan Consult 3+: is a diagnostic and programming software for Nissan vehicles, allowing data reading and analysis, as well as module programming

Supports major ECU Module programming software

• Allison DOC Transmission: is a diagnostic software for Allison automatic transmissions. It provides access to various information and features such as reading fault codes, real-time parameter monitoring, solenoid testing, and more.
• Air Bag Tool: is a diagnostic tool specialized in airbag systems. It allows you to read and clear fault codes, reset airbag warning lights and perform other diagnostic operations.
• BitBox: is a programming interface for electronic control modules (ECUs). It supports reading and writing map files for a wide variety of ECUs and can be used with various programming software.
• Combiloader: is a programming tool for electronic control modules. It can be used to read and write map files and adjust configuration parameters on various ECUs.
• Chiploader: is another programming tool for electronic control modules. It supports reading and writing map files for various ECUs and also allows you to adjust configuration parameters.
• ECU Flasher: is a programming tool for electronic control modules. It supports reading and writing map files for a wide variety of ECUs and can be used with various programming software.
• JCB Service Master 4: is a diagnostic software for JCB machines. It provides access to various information and features such as reading fault codes, real-time parameter monitoring, solenoid testing and more.
• MDFLASHER: is a programming tool for electronic control modules. It supports reading and writing map files for various ECUs and also allows adjusting configuration parameters.
• MMC Flasher: is a programming tool for electronic control modules. It supports reading and writing map files for various ECUs and also allows you to adjust configuration parameters.
• Noregon JPRO: is a diagnostic software for heavy-duty vehicles. It provides access to various information and features such as reading fault codes, real-time parameter monitoring, solenoid testing, and more.
• OpenBox: is a programming interface for electronic control modules. It supports reading and writing map files for a wide variety of ECUs and can be used with various programming software.
• PCMFlash: is a programming tool for electronic control modules. It supports reading and writing map files for various ECUs and also allows you to adjust configuration parameters.
• Wabco Toolbox: is a diagnostic software for commercial vehicle brake and suspension systems. It provides access to various information and features such as reading fault codes, testing actuators and sensors, calibrating sensors, and more.

These programs and tools are used to perform diagnostics and programming on electronic control modules (ECUs) in different types of vehicles, from automobiles to heavy machinery.

Customer Support and Contact Information

We are always ready to provide the best service. If you need any help or have any questions, please contact us via email Contact@obd2truck.com or WhatsApp .

Our opening hours are Monday to Friday, from 8am to 6pm. Count on us for any support you may need!